-
UHF 450-512 MHz (400-470 MHz also available)
-
45 Watt
-
IDAS™ conventional and IDAS single-site
trunking
-
Digital/Analog mixed mode operation
-
Built-in 2-Tone, 5-Tone, CTCSS and DTCS
-
MDC 1200 compatile
-
MIL-STD-810 F rugged construction
-
4W (typ.) front mounted speaker
128 channels with 8 zones
Ample 128 channel capacity allows most
companies plenty of room to grow. Up to 8 zones lets you group together
channels in logical fashion.
8–character LCD
An 8–character alphanumeric LCD with
user-friendly icons shows a variety of information and operating status such
as caller's name, received message, etc.
Built military rugged!
The tough aluminum die-cast chassis and
polycarbonate front panel have been tested to the MIL
standard 810 F.
Compact hand microphone
Select from 5 levels of mic grain, for
clearer transmission.
Large programmable buttons
For easy access to often used functions,
P0-P3 buttons are programmable to meet specific needs. Buttons and LCD
display are backlit for night time operation.
GPS receiver connection
With optional D-SUB 25-pin ACC cable
OPC-2078, an external GPS receiver or PC can be connected.
Powerful, front-facing
speaker
4 watts (typ.) front facing speaker delivers
clear and loud audio throughout a vehicle's cabin. Digital modulation adds
distinct clarity to received voices.
IDAS™ digital mode operation
The IC-F6121D series provides NXDN™ CAI-based
IDAS digital mode. It is also compatible with IDAS multi-site conventional
and IDAS single-site trunking. The following IDAS features are programmable.
-
PTT ID
-
Status
-
Radio check
-
Call alert
-
Emergency (no ACK)
-
GPS data (PC and software required to show
received position data)
-
Individual/Talkroup list (Max 500)
-
RAN (Radio Access Number)
-
Stun/kill/revive (RX)
-
Remote monitor (RX)
-
Digital voice scrambler
-
SDM (Short Data Message)
Built-in 2-tone and 5-tone
(analog mode)
2-Tone and 5-tone signaling give you
selective calling, quiet stand-by and other convenient functions with
programming. The stun/kill functions disable a radio over the air and the
revive function restores the stunned radio.
Scan features
The priority scan allows you to monitor one
or two priority channels while scanning other non-priority channels. The
transmits channel and talk back functions allow you to make a quick response
while scanning.
MDC 1200 compatible (analog
mode)
The following MDC features are available with
the built-in MDC signaling.
-
PTT ID
-
Radio check (RX)
-
Emergency (No ACK)
-
Stun/Revive (RX)
-
500 alias table (Max.)
Lone worker function
When the radio is not operated for a preset
period, a warning beep will sound, alerting the radio user to check in. If
the radio user does not check in before the preset time runs out, then the
radio automatically sends out an emergency signal.
The IC-F6121D: a multitude of advantages
because it's IDAS
Advantage 1: Digital/analog
mixed mode
The IC-F62121D series can receive both analog
mode and digital mode signals on a single channel and automatically selects
the received mode to reply to the received call, while the talk back timer
remains. It's a smart way to grow into digital radio – at your own pace, as
your budget and comfort allow.
Advantage 2: Digital and
analog individual/group call
The IC-F6121D series allows you to call
individual or group users. The radio automatically sends own ID number when
the PTT button is held down. The alias name or individual/group ID is
displayed on the LCD while receiving a message allowing you to identify who
is calling.
Advantage 3: Status message
and short data message
Up to 100 status conditions can be set and
sent with voice call. Also, you can request another IDAS radio to send their
status and receive it. Up to 100-character of short data message can be sent
and received. To send more than 9-character short data message, PC
connection is required.
Advantage 4: GPS capability
When used with an external GPS receiver, the
IC-F6121D series can transmit accurate position data for use with vehicle
management applications.
Advantage 5: Multi-site
conventional mode
When using the IC-F6121D series in IDAS
multi-site conventional mode, the IC-F6121D can communicate with other IDAS
radio users working with other repeater sites and/or virtual radio/PC
dispatch stations on the IDAS network.
IDAS single-site trunking
The IC-F6121D series can be used in an IDAS
single-site trunking system. The IDAS trunking system is a distributed
system with no dedicated control channel, so more voice traffic channels are
available for increased system capacity.
*All advantages
shown represent possible system configurations. Ask your Icom dealer to
configure an IDAS system that works best for you. Note: Private IP Network
or VPN Tunnels through the Internet with static endpoints.
Other features
-
CTCSS/DTCS encode/decoder*
-
8 DTMF autodial memories
-
Microphone hanger action programmable
-
Optional DTMF microphone (HM-152T)
-
PC programmable
-
Power-on password function
-
Time out timer
-
Talk around function
-
Nuisance delete function*
-
Forced narrow function*
* = analog only
INCLUDES:
-
Free
programming
-
Mounting Bracket
-
Modular Hand Microphone
-
Owners Manual
Dim, 5.91"(w)×1.57"(h)×6.59"(d)
2.4 lbs